PG-120T Cryogenic Deflashing & Deburring Machine (120 Liter) for Deflashing
PROCESSING PRINCIPLE
As the temperature drops, rubber and plastic parts harden, become brittle, and crystallize, progressively losing flexibility. At brittle temperatures, these parts are easily broken by external forces. The flash on molded products is typically thinner than the finished product and becomes brittle sooner in low temperatures. The cryogenic deflashing machine leverages this principle, operating within a time frame where the flash is brittle but the products retain flexibility. High-speed projected special plastic media strike the flashes, clearing out the brittle burrs without damaging the product.
Product Feature
FUNCTIONS
Our machine excels in removing the flash from small rubber and plastic parts like O-rings, gaskets, and other molded components.
Utilizing cryogenic processing technology, the flashes are first frozen and then removed by high-speed projection media (Polycarbonate blast), significantly enhancing the surface quality of molded rubber and plastic parts.
Product Specification / Models
APPLICATIONS
A. O-rings, and irregular rubber parts of various materials and sizes.
B. Micro-electronic product components.
C. Precision elastomeric parts.
D. Precision injection molding plastic parts.
E. R & D part runs.
F. Die-casting products, such as zinc, aluminum, and magnesium alloys.
FEATURES
High efficiency: This machine can replace approximately 60-80 workers in flash removal.
High precision: It effectively removes small and hardened flashes that manual labor cannot, thereby improving product precision.
Low cost: This machine offers a cost-effective alternative to manual processing.
SPECIFICATIONS
TECHNICAL INFORMATION |
MODE |
PG-120T |
MACHINE PHOTO |
|
SIZE(L*W*H) |
1200*1250*2200MM |
WEIGHT |
1000KG |
POWER |
Ac380v 50Hz |
ELECTRICTY |
8Kw*3Ph |
TEMPERATURE |
-130 - +50ºC |
PRESSURE |
0.5-0.7Mpa |
BARRAEL CAPACITY |
100L or 120L |
EFFECTIVE CAPACITY |
40L` |
WHEEL SPEED |
3000rpm - 7000rpm |
COOLING MEDIA |
Liquid Nitrogen |
OPETATION MODE |
Touch Screen |
FRAME |
SUS304 |
WHEEL DIAMETER |
AL φ350mm |
BLASTING SPEED |
143.3m/s |
OPERATION PROCESS
FEATURES
High efficiency: This machine can replace approximately 60-80 workers in flash removal.
High precision: It effectively removes small and hardened flashes that manual labor cannot, thereby improving product precision.
Low cost: This machine offers a cost-effective alternative to manual processing.
Installation Instructions
OUR FACTORY AND WORKSHOP
WORKSHOP
POLAND AND USA CUSTOMERS INSTALLATION.